MRTG
The Multi Router Traffic Grapher will allow you to generate nice graphs of the data available via SNMP.
This can be system information like uptime, interface information and statistics, and more.
For more info see the MRTG site.
Here an example on the graph you can generate:
Installing MRTG
I installed MRTG on a Win7 pc. For this I followed the Windows Installation Guide.
I also installed MGTG as a service.
MRTG Config file
You can generate a initial config file with the cfgmaker tool.
This will query the snmp agent, and from the obtained info a config file is created:
perl cfgmaker public@192.168.178.1 —global "WorkDir: c:\www\mrtg" —output mrtg.cfg
But be aware that I have noticed that interface index numbering changes often at reboot, or when router parameters are changed.
For the wifi interfaces 'wifi0' and 'ath0' of the 7270v3 I have even seen multiple interface indexes were created where only the last created with actual counters. A restart of the snmpd will correct this.
In the generated config file most, if not all, are commented out due to e.g. if there is no speed information found. Start with remove the comments character for one interface, and get this to work.
After you have cleared all possible config errors (e.g. watch leading spaces which seems not accepted at some locations), you can add more interfaces.
You can also change the ADSL related interfaces to have two speeds (asymmetric) so the percentage of used link speed for up and down is more realistic.
Here my current config for the 7270v3:
I added config for monitoring CPU load (1, 5, and 15 minutes average), CPU Usage, and Memory usages. This to help with trouble shooting performance issues.
A good explanation of how to interpret the CPU load values can be found here.
# Created by # cfgmaker public@192.168.178.1 --global "WorkDir: c:\www\mrtg" --output mrtg.cfg ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata WorkDir: c:\Users\<user>\www\mrtg RunAsDaemon: yes ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no ###################################################################### # System: fritz.fonwlan.box # Description: Linux fritz.fonwlan.box 2.6.19.2 #1 Fri Apr 8 14:13:30 CEST 2011 mips # Contact: root@localhost # Location: Unknown ###################################################################### ## Interface 1 >> Descr: 'cpmac0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_cpmac0]: \cpmac0:public@192.168.178.1: SetEnv[192.168.178.1_cpmac0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="cpmac0" MaxBytes[192.168.178.1_cpmac0]: 12500000 Title[192.168.178.1_cpmac0]: Traffic Analysis for 1 -- cpmac0 100Mbit/s Ethernet switch PageTop[192.168.178.1_cpmac0]: <h1>Traffic Analysis for 1 -- cpmac0 100Mbit/s Ethernet switch</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>cpmac0 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>12.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 2 >> Descr: 'lo' | Name: 'No Name' | Ip: '127.0.0.1' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * it is a Software Loopback interface Target[192.168.178.1_lo]: \lo:public@192.168.178.1: SetEnv[192.168.178.1_lo]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo" MaxBytes[192.168.178.1_lo]: 1250000 Title[192.168.178.1_lo]: Traffic Analysis for 2 -- lo Local Loopback Interface PageTop[192.168.178.1_lo]: <h1>Traffic Analysis for 2 -- lo Local Loopback Interface</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>lo </td> </tr> <tr> <td>ifType:</td> <td>softwareLoopback (24)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1250.0 kBytes/s</td> </tr> <tr> <td>Ip:</td> <td>127.0.0.1 (localhost)</td> </tr> </table> </div> ### Interface 3 >> Descr: 'sit0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ### The following interface is commented out because: ### * it is administratively DOWN ### * it is operationally DOWN ### * has no ifSpeed property # # Target[192.168.178.1_sit0]: \sit0:public@192.168.178.1: # SetEnv[192.168.178.1_sit0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sit0" # MaxBytes[192.168.178.1_sit0]: 0 # Title[192.168.178.1_sit0]: Traffic Analysis for 3 -- sit0 # PageTop[192.168.178.1_sit0]: <h1>Traffic Analysis for 3 -- sit0</h1> # <div id="sysdetails"> # <table> # <tr> # <td>System:</td> # <td>fritz.fonwlan.box in Unknown</td> # </tr> # <tr> # <td>Maintainer:</td> # <td>root@localhost</td> # </tr> # <tr> # <td>Description:</td> # <td>sit0 </td> # </tr> # <tr> # <td>ifType:</td> # <td>Encapsulation Interface (131)</td> # </tr> # <tr> # <td>ifName:</td> # <td>No Name</td> # </tr> # <tr> # <td>Max Speed:</td> # <td>0.0 Bytes/s</td> # </tr> # <tr> # <td>Ip:</td> # <td>No Ip (No DNS name)</td> # </tr> # </table> # </div> ## Interface 4 >> Descr: 'eth0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_eth0]: \eth0:public@192.168.178.1: SetEnv[192.168.178.1_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0" MaxBytes[192.168.178.1_eth0]: 12500000 Title[192.168.178.1_eth0]: Traffic Analysis for 4 -- eth0 PageTop[192.168.178.1_eth0]: <h1>Traffic Analysis for 4 -- eth0</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>eth0 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>12.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 6 >> Descr: 'lan' | Name: 'No Name' | Ip: '169.254.1.1' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_lan]: \lan:public@192.168.178.1: SetEnv[192.168.178.1_lan]: MRTG_INT_IP="169.254.1.1" MRTG_INT_DESCR="lan" MaxBytes[192.168.178.1_lan]: 12500000 Title[192.168.178.1_lan]: Traffic Analysis for 6 -- lan (eth + wifi) PageTop[192.168.178.1_lan]: <h1>Traffic Analysis for 6 -- lan (eth + wifi)</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>lan </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>12.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>169.254.1.1 (No DNS name)</td> </tr> </table> </div> ## Interface 7 >> Descr: 'guest' | Name: 'No Name' | Ip: '192.168.179.1' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_guest]: \guest:public@192.168.178.1: SetEnv[192.168.178.1_guest]: MRTG_INT_IP="192.168.179.1" MRTG_INT_DESCR="guest" MaxBytes[192.168.178.1_guest]: 6750000 Title[192.168.178.1_guest]: Traffic Analysis for 7 -- guest (Guest WiFi) PageTop[192.168.178.1_guest]: <h1>Traffic Analysis for 7 -- guest (Guest WiFi)</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>guest </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>6.75 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>192.168.179.1 (No DNS name)</td> </tr> </table> </div> ## Interface 22 >> Descr: 'wifi0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_wifi0]: \wifi0:public@192.168.178.1: SetEnv[192.168.178.1_wifi0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi0" MaxBytes[192.168.178.1_wifi0]: 6750000 Title[192.168.178.1_wifi0]: Traffic Analysis for 22 -- wifi0 PageTop[192.168.178.1_wifi0]: <h1>Traffic Analysis for 22 -- wifi0</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>wifi0 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>6.75 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 25 >> Descr: 'ath0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_ath0]: \ath0:public@192.168.178.1: SetEnv[192.168.178.1_ath0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath0" MaxBytes[192.168.178.1_ath0]: 6750000 Title[192.168.178.1_ath0]: Traffic Analysis for 25 -- ath0 PageTop[192.168.178.1_ath0]: <h1>Traffic Analysis for 25 -- ath0</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>ath0 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>6.75 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 30 >> Descr: 'guest1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_guest1]: \guest1:public@192.168.178.1: SetEnv[192.168.178.1_guest1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="guest1" MaxBytes[192.168.178.1_guest1]: 6750000 Title[192.168.178.1_guest1]: Traffic Analysis for 30 -- guest1 (Guest WiFi) PageTop[192.168.178.1_guest1]: <h1>Traffic Analysis for 30 -- guest1 (Guest WiFi)</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>guest1 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>6.75 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 37 >> Descr: 'dsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ### * has no ifSpeed property Target[192.168.178.1_dsl]: \dsl:public@192.168.178.1: SetEnv[192.168.178.1_dsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="dsl" MaxBytes1[192.168.178.1_dsl]: 1500000 MaxBytes2[192.168.178.1_dsl]: 128000 Title[192.168.178.1_dsl]: Traffic Analysis for 37 -- dsl PageTop[192.168.178.1_dsl]: <h1>Traffic Analysis for 37 -- dsl</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>dsl </td> </tr> <tr> <td>ifType:</td> <td>ppp (23)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 38 >> Descr: 'adsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_adsl]: \adsl:public@192.168.178.1: SetEnv[192.168.178.1_adsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="adsl" MaxBytes1[192.168.178.1_adsl]: 1500000 MaxBytes2[192.168.178.1_adsl]: 128000 Title[192.168.178.1_adsl]: Traffic Analysis for 38 -- atm PageTop[192.168.178.1_adsl]: <h1>Traffic Analysis for 38 -- atm</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>adsl </td> </tr> <tr> <td>ifType:</td> <td>atm (37)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 43 >> Descr: 'sixxs' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_sixxs]: \sixxs:public@192.168.178.1: SetEnv[192.168.178.1_sixxs]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sixxs" MaxBytes1[192.168.178.1_sixxs]: 1500000 MaxBytes2[192.168.178.1_sixxs]: 128000 Title[192.168.178.1_sixxs]: Traffic Analysis for 43 -- sixxs PageTop[192.168.178.1_sixxs]: <h1>Traffic Analysis for 43 -- sixxs</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>sixxs </td> </tr> <tr> <td>ifType:</td> <td>Other (1)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> # Router CPU one minute load averages Target[cpu.1]:.1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1.5.1:public@192.168.178.1: RouterUptime[cpu.1]: sysUpTime.0:public@192.168.178.1: MaxBytes[cpu.1]: 1000 Title[cpu.1]: CPU LOAD PageTop[cpu.1]: <H1>CPU one minute load averages</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7270</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>One minute load averages</td> </tr> </table> </div> ShortLegend[cpu.1]: avg cpu/min Factor[cpu.1]: 0.01 YLegend[cpu.1]: CPU Utilization Legend1[cpu.1]: CPU Utilization (Load) Legend2[cpu.1]: CPU Utilization (Load) Legend3[cpu.1]: Legend4[cpu.1]: LegendI[cpu.1]: LegendO[cpu.1]: Usage Options[cpu.1]: gauge, unknaszero # Router CPU five minute load averages Target[cpu.2]:.1.3.6.1.4.1.2021.10.1.5.2&.1.3.6.1.4.1.2021.10.1.5.2:public@192.168.178.1: RouterUptime[cpu.2]: .1.3.6.1.2.1.1.3.0:public@192.168.178.1: MaxBytes[cpu.2]: 1000 Title[cpu.2]: CPU LOAD PageTop[cpu.2]: <H1>CPU five minute load averages</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7270</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>Five minute load averages</td> </tr> </table> </div> ShortLegend[cpu.2]: avg cpu/5 min Factor[cpu.2]: 0.01 YLegend[cpu.2]: CPU Utilization Legend1[cpu.2]: CPU Utilization (Load) Legend2[cpu.2]: CPU Utilization (Load) Legend3[cpu.2]: Legend4[cpu.2]: LegendI[cpu.2]: LegendO[cpu.2]: Usage Options[cpu.2]: gauge, unknaszero # Router CPU fifteen minute load averages Target[cpu.3]:.1.3.6.1.4.1.2021.10.1.5.3&.1.3.6.1.4.1.2021.10.1.5.3:public@192.168.178.1: RouterUptime[cpu.3]: sysUpTime.0:public@192.168.178.1: MaxBytes[cpu.3]: 1000 Title[cpu.3]: CPU LOAD PageTop[cpu.3]: <H1>CPU fifteen minute load averages</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7270</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>Fifteen minute load averages</td> </tr> </table> </div> ShortLegend[cpu.3]: avg cpu/15 min Factor[cpu.3]: 0.01 YLegend[cpu.3]: CPU Utilization Legend1[cpu.3]: CPU Utilization (Load) Legend2[cpu.3]: CPU Utilization (Load) Legend3[cpu.3]: Legend4[cpu.3]: LegendI[cpu.3]: LegendO[cpu.3]: Usage Options[cpu.3]: gauge, unknaszero # Router CPU Utilization ssCpuIdle.0 Target[cpu.idle]: 100 - .1.3.6.1.4.1.2021.11.11.0&.1.3.6.1.4.1.2021.11.11.0:public@192.168.178.1: RouterUptime[cpu.idle]: sysUpTime.0:public@192.168.178.1: MaxBytes[cpu.idle]: 1000 Title[cpu.idle]: CPU Utilization PageTop[cpu.idle]: <H1>CPU Utilization</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7270</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>CPU Utilization</td> </tr> </table> </div> ShortLegend[cpu.idle]: % YLegend[cpu.idle]: CPU Utilization Legend1[cpu.idle]: CPU Utilization %(Load) Legend2[cpu.idle]: CPU Utilization %(Load) Legend3[cpu.idle]: Legend4[cpu.idle]: LegendI[cpu.idle]: LegendO[cpu.idle]: Usage Options[cpu.idle]: gauge, unknaszero # Router Used Memory = Memory - Free Memory # The total memory can be obtained from /proc/meminfo # For the 7390 the MemTotal = 109168 kB # For the 7270v3 the MemTotal = 59716 kB Target[mem.used]: 59716 - .1.3.6.1.4.1.2021.4.11.0&.1.3.6.1.4.1.2021.4.11.0:public@192.168.178.1: RouterUptime[mem.used]: sysUpTime.0:public@192.168.178.1: MaxBytes[mem.used]: 59716 Title[mem.used]: Used Memory PageTop[mem.used]: <H1>Used Memory</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7270</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>Used Memory</td> </tr> </table> </div> ShortLegend[mem.used]: kBytes YLegend[mem.used]: Used Memory Legend1[mem.used]: Used Memory (Total is 59716) Legend2[mem.used]: Used Memory (Total is 59716) Legend3[mem.used]: Legend4[mem.used]: LegendI[mem.used]: LegendO[mem.used]: Usage Options[mem.used]: gauge, unknaszero WorkDir: c:\Users\<user>\www\mrtg
For the 7390 I have the following config (not so much different).
# Created by # cfgmaker public@192.168.178.1 --global "WorkDir: c:\www\mrtg" --output mrtg_7390.cfg ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata WorkDir: c:\Users\<user>\www\mrtg RunAsDaemon: yes ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no ###################################################################### # System: fritz.fonwlan.box # Description: Linux fritz.fonwlan.box 2.6.28.10 #1 Thu Mar 21 15:33:40 CET 2013 mips # Contact: root@localhost # Location: Unknown ###################################################################### ## Changes to use RRDTool as explained in: http://oss.oetiker.ch/mrtg/doc/mrtg-rrd.en.html # LogFormat: rrdtool # PathAdd: c:\rrdtool\rrdtool-1.4.7\win32\Debug # LibAdd: c:\rrdtool\rrdtool-1.4.7\bindings\perl-shared ## Interface 1 >> Descr: 'lo' | Name: 'No Name' | Ip: '127.0.0.1' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * it is a Software Loopback interface Target[192.168.178.1_lo]: \lo:public@192.168.178.1: SetEnv[192.168.178.1_lo]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo" MaxBytes[192.168.178.1_lo]: 1250000 Title[192.168.178.1_lo]: Traffic Analysis for 1 -- lo Local Loopback Interface PageTop[192.168.178.1_lo]: <h1>Traffic Analysis for 1 -- lo Local Loopback Interface</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>lo </td> </tr> <tr> <td>ifType:</td> <td>softwareLoopback (24)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1250.0 kBytes/s</td> </tr> <tr> <td>Ip:</td> <td>127.0.0.1 (localhost)</td> </tr> </table> </div> ### Interface 2 >> Descr: 'sit0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ### The following interface is commented out because: ### * it is administratively DOWN ### * it is operationally DOWN ### * has no ifSpeed property # # Target[192.168.178.1_sit0]: \sit0:public@192.168.178.1: # SetEnv[192.168.178.1_sit0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sit0" # MaxBytes[192.168.178.1_sit0]: 0 # Title[192.168.178.1_sit0]: Traffic Analysis for 2 -- sit0 # PageTop[192.168.178.1_sit0]: <h1>Traffic Analysis for 2 -- sit0</h1> # <div id="sysdetails"> # <table> # <tr> # <td>System:</td> # <td>fritz.fonwlan.box in Unknown</td> # </tr> # <tr> # <td>Maintainer:</td> # <td>root@localhost</td> # </tr> # <tr> # <td>Description:</td> # <td>sit0 </td> # </tr> # <tr> # <td>ifType:</td> # <td>Encapsulation Interface (131)</td> # </tr> # <tr> # <td>ifName:</td> # <td>No Name</td> # </tr> # <tr> # <td>Max Speed:</td> # <td>0.0 Bytes/s</td> # </tr> # <tr> # <td>Ip:</td> # <td>No Ip (No DNS name)</td> # </tr> # </table> # </div> ## Interface 3 >> Descr: 'cpmac0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_cpmac0]: \cpmac0:public@192.168.178.1: SetEnv[192.168.178.1_cpmac0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="cpmac0" MaxBytes[192.168.178.1_cpmac0]: 128000000 Title[192.168.178.1_cpmac0]: Traffic Analysis for 3 -- cpmac0 1Gbit/s Ethernet switch PageTop[192.168.178.1_cpmac0]: <h1>Traffic Analysis for 3 -- cpmac0 1Gbit/s Ethernet switch</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>cpmac0 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>128 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 4 >> Descr: 'eth0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_eth0]: \eth0:public@192.168.178.1: SetEnv[192.168.178.1_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0" MaxBytes[192.168.178.1_eth0]: 12500000 Title[192.168.178.1_eth0]: Traffic Analysis for 4 -- eth0 PageTop[192.168.178.1_eth0]: <h1>Traffic Analysis for 4 -- eth0</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>eth0 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>12.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 5 >> Descr: 'lan' | Name: 'No Name' | Ip: '169.254.1.1' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_lan]: \lan:public@192.168.178.1: SetEnv[192.168.178.1_lan]: MRTG_INT_IP="169.254.1.1" MRTG_INT_DESCR="lan" MaxBytes[192.168.178.1_lan]: 12500000 Title[192.168.178.1_lan]: Traffic Analysis for 5 -- lan (eth + wifi) PageTop[192.168.178.1_lan]: <h1>Traffic Analysis for 5 -- lan (eth + wifi)</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>lan </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>12.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>169.254.1.1 (No DNS name)</td> </tr> </table> </div> ## Interface 6 >> Descr: 'guest' | Name: 'No Name' | Ip: '192.168.179.1' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_guest]: \guest:public@192.168.178.1: SetEnv[192.168.178.1_guest]: MRTG_INT_IP="192.168.179.1" MRTG_INT_DESCR="guest" MaxBytes[192.168.178.1_guest]: 37500000 Title[192.168.178.1_guest]: Traffic Analysis for 6 -- guest (Guest WiFi) PageTop[192.168.178.1_guest]: <h1>Traffic Analysis for 6 -- guest (Guest WiFi)</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>guest </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>37.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>192.168.179.1 (No DNS name)</td> </tr> </table> </div> ## Interface 19 >> Descr: 'wifi0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_wifi0]: \wifi0:public@192.168.178.1: SetEnv[192.168.178.1_wifi0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi0" MaxBytes[192.168.178.1_wifi0]: 37500000 Title[192.168.178.1_wifi0]: Traffic Analysis for 19 -- wifi0 PageTop[192.168.178.1_wifi0]: <h1>Traffic Analysis for 19 -- wifi0</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>wifi0 </td> </tr> <tr> <td>ifType:</td> <td>Other (1)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>37.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 20 >> Descr: 'wifi1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_wifi1]: \wifi1:public@192.168.178.1: SetEnv[192.168.178.1_wifi1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="wifi1" MaxBytes[192.168.178.1_wifi1]: 37500000 Title[192.168.178.1_wifi1]: Traffic Analysis for 20 -- wifi1 PageTop[192.168.178.1_wifi1]: <h1>Traffic Analysis for 20 -- wifi1</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>wifi1 </td> </tr> <tr> <td>ifType:</td> <td>Other (1)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>37.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 25 >> Descr: 'ath0' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_ath0]: \ath0:public@192.168.178.1: SetEnv[192.168.178.1_ath0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath0" MaxBytes[192.168.178.1_ath0]: 37500000 Title[192.168.178.1_ath0]: Traffic Analysis for 25 -- ath0 PageTop[192.168.178.1_ath0]: <h1>Traffic Analysis for 25 -- ath0</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>ath0 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>37.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 26 >> Descr: 'ath1' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_ath1]: \ath1:public@192.168.178.1: SetEnv[192.168.178.1_ath1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="ath1" MaxBytes[192.168.178.1_ath1]: 37500000 Title[192.168.178.1_ath1]: Traffic Analysis for 26 -- ath1 PageTop[192.168.178.1_ath1]: <h1>Traffic Analysis for 26 -- ath1</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>ath1 </td> </tr> <tr> <td>ifType:</td> <td>ethernetCsmacd (6)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>37.5 MBytes/s</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 37 >> Descr: 'dsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_dsl]: \dsl:public@192.168.178.1: SetEnv[192.168.178.1_dsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="dsl" MaxBytes1[192.168.178.1_dsl]: 1500000 MaxBytes2[192.168.178.1_dsl]: 128000 Title[192.168.178.1_dsl]: Traffic Analysis for 37 -- dsl PageTop[192.168.178.1_dsl]: <h1>Traffic Analysis for 37 -- dsl</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>dsl </td> </tr> <tr> <td>ifType:</td> <td>ppp (23)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 38 >> Descr: 'adsl' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_adsl]: \adsl:public@192.168.178.1: SetEnv[192.168.178.1_adsl]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="adsl" MaxBytes1[192.168.178.1_adsl]: 1500000 MaxBytes2[192.168.178.1_adsl]: 128000 Title[192.168.178.1_adsl]: Traffic Analysis for 38 -- atm PageTop[192.168.178.1_adsl]: <h1>Traffic Analysis for 38 -- atm</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>adsl </td> </tr> <tr> <td>ifType:</td> <td>atm (37)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> ## Interface 43 >> Descr: 'sixxs' | Name: 'No Name' | Ip: 'No Ip' | Eth: 'No Ethernet Id' ### ## The following interface is commented out because: ## * has no ifSpeed property Target[192.168.178.1_sixxs]: \sixxs:public@192.168.178.1: SetEnv[192.168.178.1_sixxs]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="sixxs" MaxBytes1[192.168.178.1_sixxs]: 1500000 MaxBytes2[192.168.178.1_sixxs]: 128000 Title[192.168.178.1_sixxs]: Traffic Analysis for 43 -- sixxs PageTop[192.168.178.1_sixxs]: <h1>Traffic Analysis for 43 -- sixxs</h1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box in Unknown</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>sixxs </td> </tr> <tr> <td>ifType:</td> <td>Other (1)</td> </tr> <tr> <td>ifName:</td> <td>No Name</td> </tr> <tr> <td>Max Speed:</td> <td>1.50 MBytes/s Downstream, 128 kBytes/s Upstream</td> </tr> <tr> <td>Ip:</td> <td>No Ip (No DNS name)</td> </tr> </table> </div> # Router CPU one minute load averages Target[cpu.1]:.1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1.5.1:public@192.168.178.1: RouterUptime[cpu.1]: sysUpTime.0:public@192.168.178.1: MaxBytes[cpu.1]: 1000 Title[cpu.1]: CPU LOAD PageTop[cpu.1]: <H1>CPU one minute load averages</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7390</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>One minute load averages</td> </tr> </table> </div> ShortLegend[cpu.1]: avg cpu/min Factor[cpu.1]: 0.01 YLegend[cpu.1]: CPU Utilization Legend1[cpu.1]: CPU Utilization (Load) Legend2[cpu.1]: CPU Utilization (Load) Legend3[cpu.1]: Legend4[cpu.1]: LegendI[cpu.1]: LegendO[cpu.1]: Usage Options[cpu.1]: gauge, unknaszero # Router CPU five minute load averages Target[cpu.2]:.1.3.6.1.4.1.2021.10.1.5.2&.1.3.6.1.4.1.2021.10.1.5.2:public@192.168.178.1: RouterUptime[cpu.2]: .1.3.6.1.2.1.1.3.0:public@192.168.178.1: MaxBytes[cpu.2]: 1000 Title[cpu.2]: CPU LOAD PageTop[cpu.2]: <H1>CPU five minute load averages</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7390</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>Five minute load averages</td> </tr> </table> </div> ShortLegend[cpu.2]: avg cpu/5 min Factor[cpu.2]: 0.01 YLegend[cpu.2]: CPU Utilization Legend1[cpu.2]: CPU Utilization (Load) Legend2[cpu.2]: CPU Utilization (Load) Legend3[cpu.2]: Legend4[cpu.2]: LegendI[cpu.2]: LegendO[cpu.2]: Usage Options[cpu.2]: gauge, unknaszero # Router CPU fifteen minute load averages Target[cpu.3]:.1.3.6.1.4.1.2021.10.1.5.3&.1.3.6.1.4.1.2021.10.1.5.3:public@192.168.178.1: RouterUptime[cpu.3]: sysUpTime.0:public@192.168.178.1: MaxBytes[cpu.3]: 1000 Title[cpu.3]: CPU LOAD PageTop[cpu.3]: <H1>CPU fifteen minute load averages</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7390</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>Fifteen minute load averages</td> </tr> </table> </div> ShortLegend[cpu.3]: avg cpu/15 min Factor[cpu.3]: 0.01 YLegend[cpu.3]: CPU Utilization Legend1[cpu.3]: CPU Utilization (Load) Legend2[cpu.3]: CPU Utilization (Load) Legend3[cpu.3]: Legend4[cpu.3]: LegendI[cpu.3]: LegendO[cpu.3]: Usage Options[cpu.3]: gauge, unknaszero # Router CPU Utilization ssCpuIdle.0 Target[cpu.idle]: 100 - .1.3.6.1.4.1.2021.11.11.0&.1.3.6.1.4.1.2021.11.11.0:public@192.168.178.1: RouterUptime[cpu.idle]: sysUpTime.0:public@192.168.178.1: MaxBytes[cpu.idle]: 1000 Title[cpu.idle]: CPU Utilization PageTop[cpu.idle]: <H1>CPU Utilization</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7390</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>CPU Utilization</td> </tr> </table> </div> ShortLegend[cpu.idle]: % YLegend[cpu.idle]: CPU Utilization Legend1[cpu.idle]: CPU Utilization %(Load) Legend2[cpu.idle]: CPU Utilization %(Load) Legend3[cpu.idle]: Legend4[cpu.idle]: LegendI[cpu.idle]: LegendO[cpu.idle]: Usage Options[cpu.idle]: gauge, unknaszero # Router Used Memory = Memory - Free Memory # The total memory can be obtained from /proc/meminfo # For the 7390 the MemTotal = 109168 kB # Without Swap: # Target[mem.used]: 109168 - .1.3.6.1.4.1.2021.4.11.0&.1.3.6.1.4.1.2021.4.11.0:public@192.168.178.1: # With Swap enabled: Target[mem.used]: .1.3.6.1.4.1.2021.4.5.0&.1.3.6.1.4.1.2021.4.5.0:public@192.168.178.1 - .1.3.6.1.4.1.2021.4.6.0&.1.3.6.1.4.1.2021.4.6.0:public@192.168.178.1 RouterUptime[mem.used]: sysUpTime.0:public@192.168.178.1: MaxBytes[mem.used]: 109168 Title[mem.used]: Used Memory PageTop[mem.used]: <H1>Used Memory</H1> <div id="sysdetails"> <table> <tr> <td>System:</td> <td>fritz.fonwlan.box 7390</td> </tr> <tr> <td>Maintainer:</td> <td>root@localhost</td> </tr> <tr> <td>Description:</td> <td>Used Memory</td> </tr> </table> </div> ShortLegend[mem.used]: kBytes YLegend[mem.used]: Used Memory Legend1[mem.used]: Used Memory (Total is 109168) Legend2[mem.used]: Used Memory (Total is 109168) Legend3[mem.used]: Legend4[mem.used]: LegendI[mem.used]: LegendO[mem.used]: Usage Options[mem.used]: gauge, unknaszero WorkDir: c:\Users\<user>\www\mrtg
One page overview
MRTG offers a tool to generate a web-page with for a specific period, e.g. all one-day graphs of all configured targets on one page.
In a dos-box in the mrtg\bin directory execute the following (replace <name> with your prefered name for the page).
For a page with one-day graphs:
perl indexmaker —output <name>.htm mrtg.cfg
For a page with graphs of a week, month or year:
perl indexmaker —show=week —output <name>.htm mrtg.cfg perl indexmaker —show=month —output <name>.htm mrtg.cfg perl indexmaker —show=year —output <name>.htm mrtg.cfg
Then move the created .htm file to the directory with all the generated MRTG pages.
MGTG as a service
With a new installation on Win7 I installed I decided to install on the following locations i.s.o. the root of the c: directory:
Web-pages:
C:\Users\<user>\www\mrtg\
MRTG:
C:\Program Files (x86)\mrtg-2.17.4\
Net-SNMP:
C:\Program Files (x86)\Net-SNMP\
You need to obtain the following two programs to create the service:
instsrv.exe srvany.exe
Copy them to C:\Program Files (x86)\mrtg-2.17.4\bin\ directory.
I generated a service named mrtg_7390.
cd C:\Program Files (x86)\mrtg-2.17.4\bin\ instsrv "MRTG_7390" "C:\Program Files (x86)\mrtg-2.17.4\bin\srvany.exe"
Create a registry file at the following location:
C:\Program Files (x86)\mrtg-2.17.4\bin\mrtg_7390.reg
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MRTG_7390\Parameters] "Application"="c:\\Program Files\\perl64\\bin\\wperl.exe" "AppParameters"="\"c:\\Program Files (x86)\\mrtg-2.17.4\\bin\\mrtg\" \"c:\\Program Files (x86)\\mrtg-2.17.4\\bin\\mrtg_7390.cfg\"" "AppDirectory"="c:\\Program Files (x86)\\mrtg-2.17.4\\bin\\"
Add the entries in the in the registry using the following command:
regedit /s mrtg_7390.reg
